| 李永红.纳米硫化镉的合成及其电化学催化性能测试[J].分子催化,2005,(6):495-498 |
| 纳米硫化镉的合成及其电化学催化性能测试 |
| Synthesis and Electro-catalytic Performance of CdS Nanomaterials |
| 投稿时间：2005-08-31 修订日期：2005-11-03 |
| DOI： |
| 中文关键词: 硫化镉 纳米 电化学 催化 |
| 英文关键词:Cadmium sulfide Nanomaterials Electrochemistry Catalysis |
| 基金项目:国家留学基金 |
| 李永红 |
| 天津大学化工学院绿色合成与转化教育部重点实验室,天津300072 |
| 摘要点击次数: 1410 |
| 全文下载次数: 19 |
| 中文摘要: |
| 采用CS2-SDS-正辛醇-水微乳体系制备了硫化镉纳米棒。利用XRD、SEM、TEM对产物进行表征，测试了其对多硫化物电极还原反应的催化性能，并与常规方法合成的大粒度CdS晶体进行对比．结果表明，纳米棒为六方型CdS晶体，直径约12nm．常规法合成的CdS为立方型晶体，平均粒度约为1μm．CdS纳米棒电极对硫化钠／多硫化钠电极反应的电催化活性明显高于大粒度CdS晶体电极． |
| 英文摘要: |
| The CdS nanorods were synthesized from the microemulsion system of CS2 - SDS - n-octanol - aqueous CdCl2. The final products were characterized using XRD, SEM and TEM. The electro-catalytic performance of the CdS nanorods was tested for sodium sulphide/ sodium polysulphide redox couple reaction. It has been shown that the CdS nanorods with average diameter about 12nm can be indexed as primitive hexagonal structure and they demonstrated better catalytic performance for the enhancement of the polysulfides reduction comparing to CdS bulks. |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
